MONTH MONTHLYGOAL
WEEK# DISTANCE CALORIE$ TIME
MONTHLYTOTALS:
MONTH MONTHLYGOAL
WEEK# DISTANCE CALORIE$ TIME
MONTHLYTOTALS:
i ¸ ,,,,_
MONTH MONTHLYGOAL
WEEK# DISTANCE CALORIE$ TIME
MONTHLYTOTALS:
COMMONPRODUCTQUESTIONS
ARETHESOUNDSMYTREADMILLMAKESNORMAL?
All treadmills makea certain typeof thumping noisedue to thebelt riding over therollers, especiallynew
treadmills. Thisnoise will diminish overtime, although may not totally go away. Overtime, the belt will
stretch, causing the belt to ride smoother overthe rollers.
WHYI$ THETREADMILLI PURCHASEDLOUDERTHANTHEONEATTHESTORE?
All fitness products seemquieter in a large store showroombecausethereis generally morebackgroundnoise
than in your home.Also, therewit be less reverberationon a carpeted concretefloor than on a woodoverlay
floor.Sometimesa heavyrubber mat will help reducereverberationthrough the floor.If a fitness product is
placed closeto a wall, therewit be morereflected noise.
WHENSHOULDI BEWORRIEDABOUTA NOISE?
Aslong as the soundsyour treadmill makesare no louder than a normalconversationaltoneof voice,it is
considerednormalnoise.
PROBLEM: Theconsoledoes not light up and/or the belt doesnot move.
SOLUTZON,",Verifythe foflowing:
DOESTHEREDLIGHTONTHEON/OFFSWITCHLIGHTUP?
IF YES..
,, Doublecheckthat all connectionsare secure,especially the consolecable. Unplug and reconnectthe console
cable to verify.
o Makesure the consolecable is not pinched or damagedin any way.
o Turnthepower off, unplug the power cable and wait 60 seconds.Removemotor cover.Wait until aft red LED
lights havegoneoff on the motorcontrolboardbeforeproceeding.Next,verifythat noneof the wiresconnected
to thelower board are looseor disconnected.
iF NO:
0
0
0
Verifythat the outlet the machineis plugged into is functional Doublecheck that the breakerhas not tripped,
it is on a dedicated20-amp circuit, it is not on a GFCIequipped outlet, and it is not plugged into a power
strip/surge protector or extensioncord.
Thepowercord is not pinched or damagedand is properlyplugged into the outlet ANDthe machine.
Thepowerswitch is turned to the ONposition.
PROBLEM: Thetreadmill circuit breaker trips during a workout.
SOLUTION:Verify the following:
,, Makesure the treadmill is plugged into a dedicated20-amp circuit.
,, Verifythat youdo not havethe machineon an extension cord orsurge protector.
,, Confirm that themachine is not plugged into a GFCI-equippedoutlet or on a circuit that has a
GFCI-equippedoutlet onit.
,, Lubricate treadmill deckif necessary.
PROBLEM: Therunning belt does not stay centered during a workout.
SOLUT!ON: Verify the following:
,, Makesure the treadmill is on a levelsurface.
,, Verify that the belt is properly tightened and centered (Refer to the Adjustment section for detailed
directions).
i iii_ i
_ii_ii_i_!!IiI_I_!I_II_
2.0AT Rev.l.9.indd 30-31 3/3/08 11:12:40AM
To Next Page
