6. Front Electronics Board Setup
There are 2 horns in the Breeze S :
One is main Buzzer – external, located at the front of the tiller.
Second is Internal Buzzer located on the front board.
Each one of the Horns can be setup to work in one of the follows
options : Controller alarms,Tiller push button , Reverse alarm ,
Blinkers alarms.
The front board include setup options for the Horn. This can be
done with the dipswitch DSW1 that is on the front board.
Dip Switches Setup is as follows : (Shown the Default Set Up)
To Next Page
