CHAPTER 4 – ADJUSTMENTS INSTRUCTIONS
(Reference numbers refer to the figures #4 and #5)
Adjusting the
Tiller angle (1.7)
Adjust the Angle of tiller as follows:
Release the Handlebars Adjusting Lever (1.10),
by pushing the lever down.
Release the lever at the desired place.
Adjusting of the
Tiller Height
Tiller height can be adjusted by technician about 40mm.
Seating into the
Breeze S
Before driving the Breeze S make sure that the
Charging Plug is disconnected from the Charging
Socket (1.12).
Note: While the Charging Plug is inserted in the
Charging Socket, the Breeze S cannot be operated.
Use the Lever (7.5) to rotate the Seat to the side for
easy access. Raise the Armrest (7.3) to give you easy
access to the Seat.
Adjust the seat Forward Reverse using the Lever(7.4)
Handlebars and
Hand protectors
When driving always keep your hands on the
handlebars (1.7) and within the hand protectors (1.6).
Adjust the shock
absorbers to the
user.
I t is possible to adjust the rear shock absorber to the
required load or way of using the Breeze. If needed,
ask a technician to adjust the absorbers for your
needs..
To Next Page
