S is stopping softly and that you hear a click coming from
the EMB engaging.
5. Make a check of all the buttons functions on the
handlebar.
6. Switch off the main key switch. Your Breeze S is now
ready to drive.
The user should know his weight and all other loads are
lower than the maximum of 160 Kg (352 lbs) / 200 Kg (440
lbs) depend on the model. If not sure it should be measured.
To transport the Breeze S in a motor vehicle , the Breeze
has to be secured while traveling .
The Foot rest of the Breeze S should be tie down (6) to the
motor vehicle floor with a suitable restrain belts and tight
systems.
The Rear part of the Breeze S should be tie down (7) as at
the 2 Yellow Marks at the rear part of the Breeze-in the lower
part of the power unit .
The tie/restrain system should be with similar components
and securing ,like the ones used in standard cars fasten belt.
Warning : When transporting the Breeze S , never use it
for any one to be seated on the scooter.
Figure 8
To reduce the height of the Breeze S while transporting it,
The seat can be removed as explained in chapter 3:
maintenance. And as well the Tiller can be folded to
horizontal position.
To Next Page
Loading...
Need help?
General
