Afore AF2.5K-SL-1 - Forced Discharging

Operation
32
ForceChg: ON
PForce: 0.0%
MaxSoc: 0.0V
TimOn1: 00:00
TinOff1: 00:00
TimOn2 : 00:00
TinOff2: 00:00
TimOn3: 00:00
TinOff3: 00:00
Force Chg
5.3.10 Forced Discharging
ForceDChg: ON
PForce: 0.0%
MinSoc: 0.0V
TimOn1: 00:00
TinOff1: 00:00
TimOn2: 00:00
TinOff2: 00:00
TimOn3: 00:00
TinOff3: 00:00
Force DChg
1. ForceDChg — Forced discharging enable.
2. PForce — Forced discharging power percentage.
3. MinSoc — Forced discharging max Soc.
4. TimOn1 — Forced discharging start time 1.
5. TinOff1 — Forced discharging end time 1.
Forced charging
Forced discharge
1. ForceChg — Force charging enable.
2. PForce — Forced charging power percentage.
3. MaxSoc — Forced charging Max Soc.
4. TimOn1 — Forced charging start time 1.
5. TimOff2 — Forced charging end time 1.
6. Forced charging can be set to three time periods .
Run Param
EMS Param
* * * *
Energy management
system parameters setting
Operating parameters setting
5432
Note:
Forced discharging can be set
to three time periods.