Need help?Do you have a question about the Aftershokz OpenMove AS660 and is the answer not in the manual?
Charge the headphones using the included USB-C charging cable.
Enter pairing mode by holding volume+ until 'pairing' is announced.
Select 'OpenMove by AfterShokz' in your device's Bluetooth menu.
Click the multifunction button once to play or pause music.
Double-click the multifunction button while music is playing to skip to the next song.
Triple-click the multifunction button while music is playing to skip to the previous song.
Click the multifunction button once to answer or end a call.
Press and hold the volume+ button to power the device on or off.
Press and hold both volume buttons for 2 seconds during a call to mute.
Press and hold both buttons for 3 seconds during music playback to switch EQ modes.
Click volume+ or volume- button while music is paused to check battery status.
Press and hold multifunction and volume+ buttons for 3 seconds to enable multipoint.
Re-enter pairing mode and connect to the second device via Bluetooth.
Press and hold multifunction and volume buttons for 3 seconds to disable multipoint.
Hold all three buttons simultaneously for 3-5 seconds until two beeps or vibrations.
Instructions for using earplugs and adjusting EQ settings for earplug mode.
General| Type | Bone Conduction |
|---|---|
| Bluetooth | Yes |
| Bluetooth Version | 5.1 |
| Battery Life | 6 hours |
| Charging Time | 2 hours |
| Water Resistance | IP55 |
| Microphone | Yes |
| Multi-Point Pairing | Yes |
| Wireless | Yes |
| EQ Modes | Standard, Vocal Booster |
To Next Page
