EN 6
© Copyright LOTRONIC 2020
Sound sensitivity
In this Mode a number between 0-100 will be displayed. Press the UP or DOWN buttons to adjust
the sound sensitivity, 0 being the least sensitive and 100 being the most sensitive.
Pan Reverse: Reverse the Pan-movement.
Tilt 1 Reverse: Reverse the Tilt 1-movement.
Tilt 2 Reverse: Reverse the Tilt 2-movement.
Tilt 3 Reverse: Reverse the Tilt 3-movement.
Back Light: Turns the LED display back light on or off
Auto Test: The unit makes a self test.
Fixture Time ---0-9999: With this function you can display the running time of the unit.
Firmware Version ---V104: Displays the software version of the unit
Default: Restore to factory setting [YES] or [NO]
5.17 System Reset : System reset [YES] or [NO]
HOW TO OPERATE MOTOR OFFSET FUNCTION:
Press “MENU” button , then press “ENTER” for 3 seconds at least , when the interface shows “Pan
Offset”(X motor ne adjust), press button “Ok” to set motor position from value -127….127, then
Press button “Ok” to save .
CLEANING
Due to fog residue, smoke, and dust cleaning the internal and external lenses should be carried out
periodically to optimize light output.
• Clean regularly the air vents and fans.
• Use normal glass cleaner and a soft cloth to wipe down the out-side casing.
• Clean the external optics with glass cleaner and a soft cloth every 20 days.
• Always be sure to dry all parts completely before plugging the unit back in.
SPECIFICATIONS
Power supply .................................................................................................................. 100-240V~ 50/60Hz
Consumption ....................................................................................................................................140W max.
Fuse .................................................................................................................................................................. 3A
Light source ............................................................................................................... 9x 12W RGBW CREE LED
Tilt ..............................................................................................................................................................0-185°
Pan .............................................................................................................................................................0-360°
Beam angle ....................................................................................................................................................... 5°
Dimensions ........................................................................................................................458 x 429 x 208mm
Weight .......................................................................................................................................................10.6kg
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed.
To Next Page
Loading...
Need help?
General
