PF3000 Cotton Yield Monitor
Card Setup
Ag Leader Technology
March 2002
Introduction
If you are using a GPS receiver, all the GPS data must be logged to a
memory card. If you are not using a GPS receiver, you do not need a card.
The memory card must be formatted with a DOS format. Cards rarely need
to be formatted since they are usually DOS formatted before they are
shipped. If formatting is required, format the card in your PC before using.
If you will be using multiple PF3000 monitors, label the memory cards to
identify them to a specific monitor. This will help prevent confusion when
you download the card information to your PC.
IMPORTANT: You must copy memory to every log file you
create and log to before you read the card into your computer.
This is automatically performed on startup and shutdown.
Card Setup Screen
To view the card setup screen press the:
MENU key
SETUP key
CARD key
Example of card setup screens:
To Next Page
Loading...
Need help?
General
