AGA DC5 User Instruction

The Heat Indicator
The heat indicator is a guide to the stored heat within the AGA, and does not directly relate to the temperature of the
roasting oven.
An AGA is designed to work at an optimum heat setting by cycling between two fixed temperatures.
The optimum performance is usually achieved when the indicator displays the colour green. For best cooking
performance wait until the AGA contains the full amount of stored heat, which is indicated by the window being
completely filled with the colour green (Fig.1). This may take some time to achieve and can take approximately
2 – 3 hours between use for full recovery.
NOTE! Because of the temperature cycling, the green band will move and only be partially visible at times. This is
perfectly normal (Figs. 2 - 4). Cooking can be started during this part of the cycle but it may take longer to achieve the
desired result.
The lower temperature is indicated by the colour amber and cycles in the same way as full power (Fig. 5).
Full green indicates ‘ready to use’
Normal movement during cycling
Amber indicates low temperature setting. (Movement will also be seen with this setting).
13
Fig. 1
Fig. 2 Fig. 3
Fig. 4
Fig. 3
Fig. 5

AGA DC5 Specifications

General

Brand	AGA
Model	DC5
Category	Ranges
Language	English