EasyManuals Logo

AGA PRO+ APRO36DF User Manual

AGA PRO+ APRO36DF
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
18
The timed oven is not coming on when automatic cooking
Has the oven knob been left in the OFF position by
mistake? Is the oven locked (see above)?
Oven temperature getting hotter as the range gets older
If turning the knob down has not worked or only
worked for a short time then you may need a new
thermostat. This should be installed by a service
technician (see the ‘Service and Parts’ section of the
instructions).
An oven light is not working
The bulb has probably burnt out. You can buy a
replacement bulb (which is not covered under the
warranty) from a good electrical shop. Ask for a 15W
125–130V lamp, FOR OVENS (Fig.5-1).
Turn o the power at the circuit breaker.
Make sure the oven is cool. Open the oven door and
remove the oven racks.
Unscrew the bulb cover by turning counter clockwise. It
may be very sti (Fig.5-2).
Taking care to protect your ngers in case the bulb
should shatter, unscrew the old bulb.
Screw in the new bulb; screw back the bulb cover. Turn
on the circuit breaker and check that the bulb now
lights.
ArtNo.324-0005 Oven light bulb
Fig.5-1
ArtNo.324-0007 Unscrewing the bulb cover
Fig.5-2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AGA PRO+ APRO36DF and is the answer not in the manual?

AGA PRO+ APRO36DF Specifications

General IconGeneral
BrandAGA
ModelPRO+ APRO36DF
CategoryRanges
LanguageEnglish

Related product manuals