12/70
Product labelling:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause
undesired operation.
12.3 Laser classification
The Agatec DM100 generates a visible laser beam that is emitted on the front of the device.
The device complies with laser class 2 according to:
Î IEC60825-1: 2007 Safety of laser products
Laser class 2 products
Do not look into the laser beam and do not unnecessarily aim at other persons . The eye is usu-
ally protected by preventive reactions such as the eyelid closure reflex.
Labels
Position of the type label see drawing C
Bodily harm due to laser beam!
 Do not look directly into the laser beam.
 Do not look directliy into the laser beam with optical appliances (such as binoculars, telescopes).
Agatec DM100.book Page 12 Thursday, April 1, 2010 12:48 PM
To Next Page
Loading...