79026547 Rev. A 01-3
Introduction
Safety Alert Symbol
FIG. 2: This is the safety alert symbol. It means
ATTENTION! BECOME ALERT! SAFETY IS
INVOLVED!
Look for it, both in this manual and on safety decals on
tractor. It directs attention to information involving
operator safety and safety of others.
Signal Words
FIG. 3: Words DANGER, WARNING or CAUTION are
used with safety alert symbol. Learn to recognize safety
alerts and follow recommended precautions and safe
practices.
m
DANGER: Indicates an imminently
hazardous situation, if not avoided, will
result in DEATH OR VERY SERIOUS
INJURY.
m
WARNING: Indicates a potentially
hazardous situation, if not avoided, could
result in DEATH OR SERIOUS INJURY.
m
CAUTION: Indicates a potentially
hazardous situation, if not avoided, may
result in MINOR INJURY.
Informational Messages
FIG. 4: Do not operate or perform any lubrication,
maintenance or repair on tractor until reading and
understanding operation, lubrication, maintenance and
repair information.
Read and understand this manual, operator’s manual and
manuals for all attachments before operation.
Learn how to operate tractor and use controls properly.
Do not allow anyone to operate tractor without instruction
and training.
For operator’s safety and safety of others, follow all safety
precautions and instructions found in manuals and on
decals affixed to tractor and attachments.
Personal injury and death may result if precautions are
not followed.
Words IMPORTANT and NOTE are not related to
personal safety, but are used to give additional
information and tips for operating or servicing equipment.
FIG. 2
Saf
FIG. 3
N020903004
FIG. 4
N020903002
Find manuals at http://best-manuals.com/search?&s=CHAL-79026547
To Next Page
Loading...
Need help?
General