www.agfagraphics.com
20
2.10 Lockout/tagout (locked)
Lockout/tagout is a safety procedure where the machine is turned off and locked from being switched on.
This procedure ensures:
• that people can safely perform maintenance and/or repair work on the machine.
• that unauthorized people cannot turn on the machine.
2.10.1 Lockout/tagout procedure
2.10.2 Removing the padlock
Warning:
When multiple people work on the printer, each person must attach his
own padlock.
1 Shut down the printer, refer to chapter 5.
2 Turn the “Main power” switch off.
3 Lock the “Main power” switch with a padlock.
Warning:
Once the work has been completed, everybody who has fitted a padlock must remove it themselves. It is
not permitted for people to remove somebody else's padlock or to have their own padlock removed by
somebody else.
To Next Page
Loading...
Need help?
General