33
4450A EN 20060221 Basic operation (‘Operator mode’)
CR 85-X DIGITIZER
If fast preview is enabled, the CR 85-X transmits the digital image data in
blocks of typical 100 lines to the preview station.
When the CR 85-X has read the identification data of the emergency cassette,
it displays the operator main screen. The Digitizer resumes processing the
remaining cassettes in the cassette input buffer.
If you decide not to assign emergency status to a cassette after having pressed
Emergency, you can quit the Emergency function by either pressing Escape or
by pressing the Emergency key a second time (‘toggle’ key).
4 Remove the cassette from the output buffer.
Note: If a ‘WARNING’ or ‘LOCKED’ message is displayed during the
Emergency procedure, the CR 85-X will not quit the Emergency mode. Refer
to the Reference manual.
To Next Page
Loading...
