AGFA DX-D 600 - Page 73

DX- D 600
User Manual
0242F EN 20181218
65
4.1.4 INFO AREA
INFO appears just after the Ceiling Suspension has been switched ON. In this
display it is possible to check:
 Configured exposure.
 X-ray Tube Position:
G SI D
G ANG or X-ray Tube angle
G ROT or X-ray Tube rotation angle
G TILT or RAD Wall Stand DR Detector tilting angle
 X-ray Tube Position and Technique set up, depending on the technique
2P or 3P parameters are different (kV-mAs or kV-mA-ms).
 AEC set up.
Illustration 4-7
INFO Display
When the position values are in white, they indicate the current ones and in
black the previously set by default.