DX-D 600
User Manual
0242F EN 20181218
1
SECTION 1 INTRODUCTION
1.1 SYSTEM OVERVIEW
This nual contains all the necessary information to understand and operate the
DX- D 600 X- ray System. It provides a general description, safety information,
operating instructions and specifications concerning the equipments of the
different configuration possibilities: Semi- automatic and Automatic.
This manual is not intended to teach radiology or to make any type of clinical
diagnosis.
This system comprises:
Ceiling Suspension with the Control Console, X-ray Tube and
Collimator subassemblies. There are two different models available
depending on the system configuration:
G Semi-automatic Ceiling Suspension with the Touchscreen
Control Console, but it is just motorized the vertical axis to allow
the Auto-tracking function. Other axis are not motorized, so it is not
possible to complete fully the Auto-position functions.
G Automatic Ceiling Suspension with the Touchscreen Control
Console, Auto-positioning, Auto-centering and Auto-tracking
functions available.
RAD Elevating Table, available in double panel systems
RAD Wall Stand DR
X-ray Generator
There are two different system configurations depending on the number of
available DR Detectors (refer to Illustration 1-1):
G Double Panel System (default c onfiguration). It is provided with
horizontal DR Detector or RAD Table and vertical DR Detector or
RAD Wall Stand DR.
G Single Panel System is provided just with the RAD Wall
Stand DR which can operate vertically and horizontally, in that
case it is provided always with a spacer to be adapted to work with
any kind of stretcher or mobile tables.
To Next Page
Loading...
