48 ePhoto CL50 User’s Guide
Troubleshooting
The color LCD
doesn’t turn on.
The camera is connected to a computer.
Disconnect the camera or use the camera
controls in PhotoWise.
The camera is connected to a TV. Discon-
nect the camera or view the images on your
TV set.
The batteries are too weak. Replace them.
The live image on
the LCD appears
jerky.
The low light preview setting is selected.
This setting is used to display a dark scene
more brightly to help you frame the shot. Use
the setting to take a dark picture, or restore
the normal preview setting.
The live image
on the LCD looks
brighter than it
should be.
The low light preview setting is selected.
This setting is used to display a dark scene
on the LCD more brightly to help you frame
the shot. Use the setting to take a dark pic-
ture, or restore the normal preview setting.
You selected an incorrect advanced expo-
sure setting.
If the or icon is dis-
played, adjust the exposure setting or set it
to automatic.
The built-in flash
doesn’t work.
The flash is off. Check the flash setting.
Problem Possible Cause/Solution
CL50User Page 48 Wednesday, January 27, 1999 10:10 AM
To Next Page
Loading...
