CMC INDUSTRIAL ELECTRONICS LTD
Phone: (604) 421-4425 Toll Free: (888) 421-4425 Fax: (604) 421-7734
www.cmciel.com sales@cmciel.com
10. When <Down> key is pressed menu for saving of all setting is shown. In case the
configuration is done press the <Select> key and wait for confirmation message. If the
message will say that configuration failed save it again till you will get message that the
configuration succeeded.
11. There is one last part of the menu when <Down> key is pressed. This menu can read
temperatures on the actual sensors. When <Select> key is pressed the number of the
sensor can be changed and its temperature will be presented. OPI cable has opposite
structure of the sensors than CMC cable. To see what are the positions of the sensors
in certain cables see appendix 1.
************************************************ Caution *************************************************
This menu doesn’t serve as digital grain cable test. Correct reading of temperatures using the
EZTester is not indication of 100% healthy cable.
************************************************************************************************************
To Next Page