Introduction
Chapter 1 11
8480 Series Power Sensor Specifications
NOTE These specifications are valid with EPM and EPM-P Series of power meters.
The 8480 series thermocouple and diode power sensors provide accuracy, stability,
and SWR over a wide range of frequencies (100 kHz to 50 GHz) and power levels
(-70 dBm to +44 dBm)
* These uncertainties only apply to Option 033
Table 1-3 Typical measurement uncertainties of Calibration
Factor (CF) data printed on the power sensor
Frequency 25°C ± 3°C
8481A 8482A 8483A 8485A
100 kHz to 10 MHz - 0.87 1.59 -
10 MHz to 30 MHz 0.81 0.8 1.39 -
30 MHz to 500 MHz 0.78 0.8 1.41 1.29
500 MHz to 1.2 GHz 0.78 0.8 1.41 1.26
1.2 GHz to 6 GHz 0.92 0.9 1.46 1.35
6 GHz to 14 GHz 1.16 - - 1.61
14 GHz to 18 GHz 1.59 - - 1.77
18 GHz to 26.5 GHz - - - 2.47
26.5 GHz to 33 GHz - - - 3.35*
33 GHz to 34 GHz ----
34 GHz to 35 GHz ----
35 GHz to 40 GHz ----
40 GHz to 45 GHz ----
45 GHz to 50 GHz ----
To Next Page
Loading...
