Introduction
Chapter 12
General Information
Instruments Covered by Manual
A serial number label is attached to the power sensor. The serial number has two
parts: the prefix (two letters and the first four numbers), and the suffix (the last four
numbers). Refer to the Example Serial Number shown in Figure 1-1.
Figure 1-1 Example Serial Number
The two letters identify the country in which the unit was manufactured. "US"
represents the USA and "MY" represents Malaysia. The four numbers of the prefix
are a code identifying the date of a major design change incorporated in your power
sensor. The four digit suffix is a sequential number and, coupled with the prefix,
provides a unique identification for each unit produced.
When seeking information about your power sensor refer to the complete serial
number and include the full prefix number and the suffix number.
For further information concerning a serial number, contact your nearest Agilent
Technologies Sales and Service office.
To Next Page
Loading...
