Introduction
Chapter 1 19
Installation
Initial Inspection
Inspect the shipping container. If the container or packing material is damaged, it
should be kept until the contents of the shipment have been checked mechanically
and electrically. If there is mechanical damage or if the instrument does not pass the
performance tests, notify the nearest Agilent Technologies office. Keep the damaged
shipping materials (if any) for inspection by the carrier and an Agilent Technologies
representative.
Original Packaging
Containers and materials identical to those used in factory packaging are available
through Agilent Technologies’ offices. If the instrument is being returned to Agilent
Technologies for servicing, attach a tag indicating the type of service required,
return address, model number, and serial number. Also, mark the container
FRAGILE to assure careful handling. In any correspondence, refer to the instrument
by model number and serial number.
Interconnections
Refer to the power meter’s User’s Guide for interconnecting instructions.
Storage and Shipment
Environment
The instrument should be stored in a clean, dry environment. The following
limitations apply to both storage and shipment:
Temperature
- 40 to +75
o
C
Relative humidity <95%
Altitude < 7,600 metres (25,000 ft.)
To Next Page
Loading...
Need help?
General
