6-7
Acquire Commands
SWAVeform:RESet
Query :ACQuire:SWAVeform? <source>
The query returns the current state of the :ACQuire:SWAVeform command.
Returned Format [:ACQuire:SWAVeform]<source>, <destination> [,<filename>[,<format>]]<NL>
Example 10 OUTPUT 707;”:ACQUIRE:SWAVEFORM CHAN1,OFF”
SWAVeform:RESet
Command :ACQuire:SWAVeform:RESet
This command sets the save destination for all waveforms to OFF. Setting a source to OFF
removes any waveform save action from that source. This is a convenient way to turn off all
saved waveforms if it is unknown which are being saved.
Example 10 OUTPUT 707;”:ACQuire:SWAVeform:RESet”
To Next Page
Loading...
