7-11
Calibration Commands
STATus?
NOTE Use CALibrate:RECommend? to query for recommended calibrations.
Returned Format [:CALibrate:STATus] <status><NL>
<status> <Mainframe Calibration Status>,
<Channel1 Module Calibration>, 0,
<Channel2 Module Calibration>, 0,
<Channel3 Module Calibration>, 0,
<Channel4 Module Calibration>, 0
The values that always return “0” are used to make the returned format compatible with the
Agilent 83480A and 54750A.
To Next Page
Loading...
