10
Test configuration accessories
RF limiter
Externally attaches to one or both test ports of
the analyzer. Provides protection against potential
high-power transients from external devices.
• 11930A
7-mm RF limiter, DC to 6 GHz,
max power +28 dBm typical
• 11930B
50-ohm type-N RF limiter, 5 MHz to 6 GHz,
max power +28 dBm typical
Probe
• 85024A
high-frequency probe
Provides high-impedance in-circuit test
capability, from 300 kHz to 3 GHz.
Amplifier
• 8347A RF
power amplifier
Used to set leveled output power or increase
system dynamic range, from 100 kHz to 3 GHz.
Power meters
For more accurate control of leveled test-port
power. Requires an 8480 series power sensor
and a GPIB cable for connection to the 8753ET
or 8753ES.
• E4418B
single-channel power meter
• E4419B
dual-channel power meter
To Next Page
Loading...
Need help?
General
