9
Test sets (for use with 8753ES Option 011)
• 85046B
75-ohm S-parameter test set
300 kHz to 2 GHz. Requires the 11857B 75-ohm
test-port return cables. Includes a test set inter-
connect cable and four RF cables to connect to
the 8753ES Option 011.
• Option 913
Rack-mount kit, Agilent part number
5062-4069.
• 11850D
75-ohm type-N three-way power splitter
300 kHz to 2 GHz. Includes three 11852B 50-
to 75-ohm minimum loss pads for use with the
8753ES Option 011 (50 ohms). Requires the
11851B RF cable kit.
Minimum loss pads and adapters
• 11852B
50- to 75-ohm minimum loss pad (300 kHz to 3 GHz)
Adapts from 50-ohm type-N female to 75-ohm
type-N male. Nominal insertion loss is 5.7 dB.
• Option 004
Provides 50-ohm type-N male and 75-ohm
type-N female connectors.
• 11855A
75-ohm type-N accessory kit
Contains 75-ohm type-N male to type-N male
adapters, type-N female to type-N female
adapters, type-N male and female shorts, and
type-N male termination.
• 11856A
75-ohm BNC accessory kit
Contains 75-ohm type-N to 75-ohm BNC
adapters for both connector sexes, a BNC male
short and BNC male termination.
To Next Page
Loading...
