Need help?Do you have a question about the Agilent Technologies Cary 300 and is the answer not in the manual?
General| Scan Speed | Up to 2400 nm/min |
|---|---|
| Weight | 45 kg |
| Wavelength Range | 190 - 900 nm |
| Wavelength Accuracy | ±0.1 nm |
| Baseline Flatness | ±0.0003 Abs |
| Noise Level | 0.00005 Abs at 0 Abs, 500 nm |
| Sample Compartment | Standard cell holder for 10 mm pathlength cuvettes |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Light Source | Deuterium and Tungsten-Halogen lamps |
| Data Output | RS-232 |
Information on hazards and precautions for operating the equipment, including CAUTION and WARNING.
Procedures to ensure the instrument is in a safe state after maintenance or service.
Hazards associated with UV radiation from lamps and precautions to avoid eye damage.
Hazards related to high voltages and components, warning of potential shock or injury.
Step-by-step guide for installing and registering the Cary WinUV software.
Guidance on cabling, power, and initial physical instrument setup.
Overview of performance validation tests using the Validate application for system verification.
Instructions for installing and aligning single and solid sample holders in the instrument.
Safety precautions for handling and replacing UV and visible source lamps.
To Next Page