Need help?Do you have a question about the Agilent Technologies Cary 100 and is the answer not in the manual?
General| Detector | Photomultiplier Tube (PMT) |
|---|---|
| Weight | 28 kg |
| Scan Speed | Up to 2400 nm/min |
| Sample Types | Liquids, solids |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Light Source | Tungsten-Halogen and Deuterium lamps |
Ensure the instrument is in a safe state after maintenance or service procedures.
Describes hazards associated with UV radiation from deuterium and mercury lamps.
Details risks from high voltage circuits and components in the instrument.
Covers safety measures for hot surfaces, ventilation, and handling hazardous materials.
Explains various warning symbols used on the spectrometer and documentation.
Describes how indicator lights are color-coded to represent instrument status.
Outlines Agilent's adherence to EU directives for EMC and electrical safety.
Details compliance with EN55011/CISPR11 standards for professional equipment.
Lists prerequisites and preparation needed before instrument installation.
Describes the user's guide and extensive help provided with the software.
Explains formatting conventions used in the documentation for clarity.
Refers to the Site Prep Guide for detailed instrument specifications.
Details the rear and sample compartment electrical connectors.
Step-by-step guide to launching and registering the Cary WinUV software.
Advises reading the bulletin for latest release information and notes.
Explains installing communication cards or converters for computer interface.
Provides instructions for connecting and configuring the instrument.
Outlines steps and checks before powering on the instrument.
Describes using the Validate application for performance checks.
Instructions for installing and aligning cell holders in the instrument.
Details how to lock the base plate into the sample compartment.
Refers to Help for descriptions and installation of various accessories.
Explains the process and requirements for purging the sample compartment with nitrogen.
Instructions for removing the base plate for access or large apparatus.
Procedure for cleaning spills and maintaining exterior surfaces of the spectrophotometer.
Guidance on changing and aligning visible and UV lamps, including safety.
Instructions on how to check and replace fuses in the spectrophotometer.
Information on obtaining spare parts and their part numbers.
To Next Page