Installation
20 Cary 100/300/4000/5000/6000i/7000 Spectrophotometers User’s Guide
PCI-GPIB
To install a National Instruments PCI-GPIB communications card:
NOTE
Ensure that the Cary WinUV software has been installed. Refer to Page 17.
1 Turn off and unplug the computer.
2 Remove the cover, following the instructions in the manual
provided with the computer.
3 Attach one end of the ESD strap to a bare metal part of the
computer chassis and wrap the other end around your wrist.
To Next Page
Loading...
