Agilent Technologies Cary 100 - Introduction; Installation requirements; Documentation

Introduction
Cary 100/300/4000/5000/6000i/7000 Spectrophotometers User’s Guide 13
2. Introduction
Installation requirements ......................................... 13
Documentation ........................................................... 13
Specifications14
Electrical Connections .............................................. 14
Installation requirements
Before receiving your Agilent Cary instrument, you will have been
provided with a Cary Site Preparation Guide, which describes the
environmental and operating requirements of the Cary system. You
must prepare your laboratory according to these instructions before
the Cary can be installed. You should keep the site preparation guide
for future reference. If you misplace your copy, you can obtain a
replacement from your local Agilent office.
Documentation
You have been provided with the following documentation to help
you set up and operate your Cary 100/300/4000/5000/6000i/7000
system:
 This user’s guide, with safety practices and hazards information,
instructions for installing and maintaining the components of the
Cary hardware and software, and troubleshooting information
 Extensive Help (provided with the Cary WinUV software)
containing context-sensitive Help, step-by-step instructions for
frequently performed analyses, and operating instructions.