Agilent Technologies Cary 50 Installation Instructions

Cary 50 Installation Instructions
NOTE
NOTICE: This document contains references to Varian. Please note that Varian, Inc. is now part of
Agilent Technologies. For more information, go to www.agilent.com/chem.
Unpack your Cary
WARNING
Heavy Weight Hazard
The instrument weighs approximately 25 kilograms (55 pounds). To avoid injury to personnel,
damage to the instrument or damage to other equipment, ALWAYS use at least two people to lift
it into position.
To unpack the Cary 50:
1 Remove the packaging and any loose items.
2 Use two people to lift the instrument onto the bench.
3 Remove the adhesive tape. Remove the front panel by sliding it up. Unscrew
and remove the cell holder and base.

Agilent Technologies Cary 50 Specifications

General

Wavelength Range	190 - 1100 nm
Scan Speed	Up to 2400 nm/min
Light Source	Pulsed Xenon Flash Lamp
Type	UV-Vis Spectrophotometer
Photometric Accuracy	±0.003 Abs (0-0.5 Abs)
Stray Light (at 220 nm, NaI)	<0.0001%
Detector Type	Silicon Diode
Sample Compartment	Standard cell holder
Interface	RS-232
Power Requirements	100-240 VAC, 50-60 Hz
Software	Cary WinUV
Data Acquisition	Yes
Photometric Range	-4 to 4 Abs
Photometric Range (Abs)	-4 to 4 Abs