ESG Family Signal Generators Hardkey and Softkey Reference
Utility
User’s Guide 4-119
Error Info
Pressing this softkey reveals a menu of choices for viewing error
messages. In this menu you can view any of the error messages in the
queue, and you can clear all of the error messages in the queue.
Softkey Location:
Utility > Error Info
Event 1 Polarity Neg Pos (Option UN8)
This softkey in the Signal Polarity Setup menu is used to configure the
polarity of the TTL signal out at the EVENT 1 connector. Pos refers to
normal logic, while Neg refers to inverted logic.
Default Value: Pos
Softkey Location:
Utility > Instrument Adjustments > Signal Polarity Setup >
Event 1 Polarity Neg Pos
Event 2 Polarity Neg Pos (Option UN8)
This softkey in the Signal Polarity Setup menu is used to configure the
polarity of the TTL signal out at the EVENT 2 connector. Pos refers to
normal logic, while Neg refers to inverted logic.
Default Value: Pos
Softkey Location:
Utility > Instrument Adjustments > Signal Polarity Setup >
Event 2 Polarity Neg Pos
FCDMA
Press this softkey to set the current catalog type to FCDMA and display
the catalog of FCDMA files.
Softkey Location:
Utility > Memory Catalog > Catalog Type >
ARB Catalog Types > FCDMA
FIR
Press this softkey to set the current catalog type to FIR and display the
catalog of FIR files.
Softkey Location:
Utility > Memory Catalog > Catalog Type > FIR
FSK
Press this softkey to set the current catalog type to FSK and display the
catalog of FSK files.
Softkey Location:
Utility > Memory Catalog > Catalog Type >
Modulation Catalog Types > FSK
To Next Page
Loading...
