2 EPM-P Installation Guide
General
Information contained in this document is subject to
change without notice. Agilent Technologies makes
no warranty of any kind with regard to this material,
including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.
Agilent Technologies shall not be liable for errors
contained herein or for incidental or consequential
damages in connection with the furnishings,
performance, or use of this material. No part of this
document may be photocopied, reproduced, or
translated to another language without the prior
written consent of Agilent Technologies.
Copyright 2000, 2008 Agilent Technologies
Agilent Technologies, Inc.
5301 Stevens Creek Blvd.
Santa Clara. CA 95052 USA
Agilent Part No. E4416-90002
Printed in Malaysia
July 2008
Legal Information
Certification
Agilent Technologies certifies that this product met
its published specifications at the time of shipment
from the factory. Agilent Technologies further
certifies that its calibration measurements are
traceable to the United States National Institute of
Standards and Technology, to the extent allowed by
the Institute’s calibration facility, and to the
calibration facilities of other International Standards
Organization members.
Warranty
This Agilent Technologies instrument product is
warranted against defects in material and
workmanship for a period of three years from date of
shipment. During the warranty period, Agilent
Technologies will at its option, either repair or
replace products which prove to be defective. For
warranty service or repair, this product must be
returned to a service facility designated by Agilent
Technologies. Buyer shall prepay shipping charges to
Agilent Technologies and Agilent Technologies shall
pay shipping charges, duties, and taxes for products
returned to Agilent Technologies from another
country. Agilent Technologies warrants that its
software and firmware designated by Agilent
Technologies for use with an instrument will execute
its programming instructions when properly installed
on that instrument. Agilent Technologies does not
warrant that the operation of the instrument, or
firmware will be uninterrupted or error free.
Limitation of Warranty
The foregoing warranty shall not apply to defects
resulting from improper or inadequate maintenance
by Buyer, Buyer-supplied software or interfacing,
unauthorized modification or misuse, operation
outside of the environmental specifications for the
product, or improper site preparation or maintenance.
NO OTHER WARRANTY IS EXPRESSED OR
IMPLIED. AGILENT TECHNOLOGIES
SPECIFICALLY DISCLAIMS THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
Exclusive Remedies
THE REMEDIES PROVIDED HEREIN ARE
BUYER’S SOLE AND EXCLUSIVE REMEDIES.
AGILENT TECHNOLOGIES SHALL NOT BE
LIABLE FOR ANY DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER BASED ON CONTRACT,
TORT, OR ANY OTHER LEGAL THEORY.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
