Agilent EPM and EPM-P Series
Power Meters
E-series Power Sensors
Configuration Guide
EPM Series Power Meters:
E4418B Power Meter (single channel)
E4419B Power Meter (dual channel)
EPM-P Series Power Meters:
E4416A Power Meter (single channel)
E4417A Power Meter (dual channel)
E-series Power Sensors:
E441XA CW Power Sensors
(10 MHz to 26.5 GHz, sensor dependent)
E9300 Average Power Sensors
(9 kHz to 18 GHz, sensor dependent)
E9320 Peak and Average Power Sensors
(50 MHz to 18 GHz, sensor dependent)
Introduction
This configuration guide describes standard configurations, options
and compatible accessories. For full specifications, see EPM Series
Power Meters and E-Series Power Sensors Technical Specifications
(Agilent literature number 5965-6382E), or EPM-P Series Power
Meters and E9320 Power Sensors Technical Specifications
(Agilent literature number 5980-1469E). Contact your local
Agilent Technologies representative at the offices listed on the
back of this guide if you need more information.
To Next Page
Need help?
General
