3
+44 to –30 dBm:
• Power sensor 10 MHz to 18 GHz, order E9300B
• Power sensor 10 MHz to 6 GHz, order E9301B
• English-language Operating and Service Manual
(also available as Agilent part number E9300-90009)
The standard E9320 Peak and Average Power Sensors include:
• Power sensor, 50 MHz to 6 GHz, 300 kHz bandwidth, order E9321A
• Power sensor, 50 MHz to 6 GHz, 1.5 MHz bandwidth, order E9322A
• Power sensor, 50 MHz to 6 GHz, 5 MHz bandwidth, order E9323A
• Power sensor, 50 MHz to 18 GHz, 300 kHz bandwidth, order E9325A
• Power sensor, 50 MHz to 18 GHz, 1.5 MHz bandwidth, order E9326A
• Power sensor, 50 MHz to 18 GHz, 5 MHz bandwidth, order E9327A
• English-Language Operating and Service Manual
Compatibility
Power sensor compatibility
For compatibility of Power Meters, Power Sensors and Power Sensor
Cables please refer to the table below.
Firmware compatibility
The table below shows the required revision of firmware for operation
of the E9300 power sensors as well as the part number of the required
hardware upgrade kit.
Firmware upgrade information can be accessed from the World Wide
Web, free of charge. It can also be purchased as a firmware upgrade kit,
Agilent part number E4418-61035. The hardware upgrade is a simple
upgrade and the kit provides the parts required. The upgrade can be
performed at any local Service Center or at a customer site.
1. Please refer to the firmware compatibility table to ensure compatibility for this combination.
Power sensors Power meters Power sensor cables
EPM-P series EPM series 11730 E9288
power meters power meters sensor cables sensor cables
(grey) (blue)
E441X family Yes Yes Yes Yes
E9300 family Yes Yes
1
Yes Yes
E9320 family Yes No No Yes
8480 series Yes Yes Yes Yes
E4418A/E4419A E4418B/E4419B
Firmware Hardware Firmware
E9300A/01A/04A Rev A1.04.00/A2.04.00 E4418-60021 Rev A1.04.00/A2.04.00
E9300H/01H Rev A1.06.00/A2.06.00 E4418-60021 Rev A1.06.00/A2.06.00
E9300B/01B Rev A1.06.00/A2.06.00 E4418-60021 Rev A1.06.00/A2.06.00
To Next Page
Loading...
Need help?
General
