ESG Family Signal Generators Hardkey and Softkey Reference
Incr Set
User’s Guide 4-41
Incr Set
Press this front panel hardkey to change the incremental value of the
up and down arrow keys for the current active function. For example,
press
Frequency to make it the active function. The current frequency is
shown in the active entry area. The incremental value for frequency is
set to 1 MHz at the factory. Press
Incr Set and the incremental value of
the up and down arrow keys for frequency becomes the active function.
You can change the value by using three different methods:
• Use the up and down arrow keys.The arrow keys will change the
incremental value in steps equal to the current incremental value (in
this example, these are 1 MHz steps.)
• Use the front panel knob.
• Use the numeric keypad and complete your entry with a terminator
softkey.
Press
Incr Set again and the active function toggles, making frequency
the active function again.
Incremental values are persistent states; they are not affected by an
instrument preset or by a power cycle.
To Next Page
Loading...
Need help?
General
