ESG Family Signal Generators Hardkey and Softkey Reference
Save
User’s Guide 4-93
Delete Seq[n] Reg[nn]
Press this softkey to delete the contents of a specified register in a
specified sequence. Do not press this softkey until you have selected the
correct sequence and register using the
Select Seq and Select Reg
softkeys. For example, if you want to delete register 5 in sequence 4,
press
Select Seq. The currently selected sequence is displayed in the
active entry area. Change the number to 4 using the up and down
arrow keys, the front panel knob, or enter a 4 using the numeric keypad
and press the
Enter terminator softkey. Sequence 4 is now displayed in
all softkeys which specify a sequence number in this menu. Now, to
select register 5, press
Select Reg. The currently selected register is
displayed in the active entry area. Change the number to 5 in the same
way that you changed the sequence number. Register 5 is now displayed
in all softkeys which specify a register number in this menu. Now press
Delete Seq [4] Reg[05] and register 5, stored in sequence 4, will be deleted.
Be certain that you want to delete the data; you cannot recover the data
once deleted.
NOTE This softkey has exactly the same function as the softkey with the
identical name in the front panel Recall key menu.
Softkey Location:
Save > Delete Seq[n] Reg[nn]
Editing Keys
Pressing this softkey reveals a menu of choices for creating and editing
the comment text for the selected register. In this menu you can delete
the existing text in the active entry area (either the existing comment,
or comment text that you have subsequently entered), and you can
toggle the editing mode from inserting text to replacing text.
Softkey Location:
Save > Add Comment To Seq[n] Reg[nn] > Editing Keys
Editing Mode Insert Replace
Press this softkey to toggle the editing mode from inserting text to
replacing text. Insertion mode causes text to be entered in the position
directly to the right of the cursor. Replacement mode causes the text to
be entered in the position held by the cursor (replacing any existing text
in that position).
Softkey Location:
Save > Add Comment To Seq[n] Reg[nn] > Editing Keys >
Editing Mode Insert Replace
To Next Page
Loading...
Need help?
General
