Agilent N518xA, E8663B, E44x8C, and E82x7D Signal Generators Programming Guide 11
Getting Started with Remote Operation
Using the Web Browser
Enabling the Signal Generator Web Server
NOTE Javascript or Active Scripts must be enabled to use the web front panel controls.
1. Turn on the Web server as shown below.
Agilent MXG Web Server On
ESG/PSG/E8663B Web Server On
If necessary toggle Web Server to
On.
For details on each key, use the key help.
Refer to “Getting Help (Agilent MXG)” on
page 18 and the User’s Guide. For additional
SCPI command information, refer to the SCPI
Command Reference.
If necessary toggle Web Server On
Off to On.
For details on each key, use the Key and Data Field
Reference. For additional SCPI command information,
refer to the SCPI Command Reference.
To Next Page
Loading...
Need help?
General
