Agilent Technologies E4428C Programming Guide

18 Agilent N518xA, E8663B, E44x8C, and E82x7D Signal Generators Programming Guide
Getting Started with Remote Operation
Preferences
Getting Help (Agilent MXG)
Getting Help (ESG/PSG/E8663B)
Setting the Help Mode (ESG/PSG/E8663B)
For details on each key, use the key help (described in User’s Guide).
When you press Help:
Help displays for the next key you press. Use the cursor keys, Page Up, Page
Down, and the RPG knob to scroll the help text. Then press Cancel to close the
help window or press any other key to close the help window and execute that key.
For details on each key, use the key help (described in User’s Guide).
When you press Help:
Help displays for the next key you press or you see help for the next key or for
every key, depending on the Help mode.
HELP
For details on each key, use the Key and Data Field Reference. For additional SCPI command information, refer to the SCPI Command Reference.
When you press Help:
Single: Help displays only for the next key you press.
Cont: Help displays for each key you press and that key’s function activates.
To turn off the function, press Help.
SCPI commands:
:SYSTem:HELP:MODE SINGle|CONTinuous
:SYSTem:HELP:MODE?

Agilent Technologies E4428C Specifications

General

Brand	Agilent Technologies
Model	E4428C
Category	Inverter
Language	English