Agilent N518xA, E8663B, E44x8C, and E82x7D Signal Generators Programming Guide 31
Using IO Interfaces
Using LAN
Manually Configuring the Agilent MXG LAN
Manually Configuring the ESG/PSG/E8663B LAN
For details on each key, use the key help (described in User’s Guide). For additional SCPI command information, refer to the SCPI
Command Reference.
Your hostname can be up to 20 characters long.
Utility > IO Config
SCPI commands:
:SYSTem:COMMunicate:LAN:CONFig MANual
:SYSTem:COMMunicate:LAN:CONFig?
For details on each key, use the Key and Data Field
Reference. For additional SCPI command information, refer
to the SCPI Command Reference.
The Hostname softkey is available only when LAN Config Manual DHCP is set to
Manual. Your hostname can be up to 20 characters long.
Utility > IO Config
SCPI commands:
:SYSTem:COMMunicate:LAN:CONFig MANual
:SYSTem:COMMunicate:LAN:CONFig?
To Next Page
Loading...
