Hardkey and Softkey Reference ESG Family Signal Generators
Utility
4-126 User’s Guide
Mod Status Info Off On
Press this softkey to toggle on and off the modulation status display.
When the modulation status is set to on, information about the status of
all of the modulations available is shown at any time that you have
accessed one of the modulation menus. When the modulation status is
set to off, the information about the status of all the modulations is
never displayed.
Default Value: On
Softkey Location:
Utility > Instrument Info/Help Mode > Mod Status Info Off On
Modulation Catalog Types
Press this softkey to reveal a menu of Modulation catalog type choices
for displaying files.
Softkey Location:
Utility > Memory Catalog > Catalog Type >
Modulation Catalog Types
MTONE
Press this softkey to set the current catalog type to MTONE and display
the catalog of MTONE files.
Softkey Location:
Utility > Memory Catalog > Catalog Type >
ARB Catalog Types > MTONE
NVARB
Press this softkey to set the current catalog type to NVARB and display
the catalog of NVARB files.
Softkey Location:
Utility > Memory Catalog > Catalog Type >
ARB Catalog Types > NVARB
Off
Press this softkey to turn the RTS line off. In this mode, the instrument
will ignore the state of the CTS line (3-wire connection). This setting is
not compatible with the 83300A Remote Interface.
RTS is a persistent state; it is not affected by an instrument preset or
by a power cycle.
Softkey Location:
Utility > GPIB/RS-232 >RS-232 Pace > RTS/CTS > Off
To Next Page
Loading...
Need help?
General
