37
• 501 1 GHz frequency range
• 502 2 GHz frequency range
• 503 3 GHz frequency range
• 504 4 GHz frequency range
• 506 6 GHz frequency range [requires option UNJ, includes mechanical attenuator]
• UNB High output power with mechanical attenuator
[included with 506]
• UNJ Enhanced phase noise performance
[includes 1E5]
• 1E5 High-stability time base
• 1EM Moves all front panel connectors to rear
• 003
2
ESG digital output connectivity with N5102A Baseband Studio digital
interface module
• 004
2
ESG digital input connectivity with N5102A Baseband Studio digital
interface module
• 601 Internal baseband generator with 8 MSa and digital bus capability
[40 MB] of memory
• 602 Internal baseband generator with 64 MSa and digital bus capability
[320 MB] of memory
• 005
3
6 GB internal hard drive
• UN7 Internal bit-error-rate analyzer
• 300 GSM/EDGE base station loopback BERT
• 3GPP W-CDMA FDD personality
• cdma2000 and IS-95-A personality
• TDMA personality (GSM, EDGE, GPRS, EGPRS, NADC, PDC, PHS, DECT, TETRA)
• Calibrated noise (AWGN) personality
• GPS personality
• Signal Studio for 1xEV-DO/1xEVDO Rev A
• Signal Studio for 1xEV-DV and cdma2000
• Signal Studio for 802.11 WLAN
• Signal Studio for Bluetooth
• Signal Studio for enhanced multitone
• Signal Studio for HSDPA over W-CDMA
• Signal Studio for TD-SCDMA
• Signal Studio for Noise Power Ratio (NPR)
• Signal Studio for S-DMB
• Signal Studio for T-DMB
• Signal Studio for pulse building
• Signal Studio for jitter injection
• Signal Studio toolkit
• Signal Studio for 802.16-2004 (WiMAX)
• Signal Studio for 802.16 OFDMA
• Signal Studio for DVB
• N5102A Baseband Studio digital signal interface module
• N5110B Baseband Studio for waveform capture and playback
5
• N5115A Baseband Studio for fading
5
• N5101A Baseband Studio PCI card
5
• 1CP Rack mount kit with handles
• 1CN Front handle kit
Ordering Information
1
1. All options should be ordered using E4438C-xxx, where the xxx represents the option number. For more information, please refer to the
configuration guide publication number 5988-4085EN.
2. Requires either Option 601 or 602 (baseband generator) to function.
3. Requires Option 001, 002, 601, or 602.
4. For details visit www.agilent.com/find/basebandstudio
5. Baseband Studio for waveform capture and playback and for fading both require a PC equipped with the Agilent N5101A Baseband Studio PCI card.
The PCI card is not functional as a stand-alone product.
6. For the latest information visit www.agilent.com/find/signalcreation
Frequency options
Performance enhancement options
Signal creation software
3, 6
Baseband Studio products
4
System accessories
To Next Page
Loading...
Need help?
General
