Agilent Technologies E444 AU Series User Manual

Chapter 2 93
Instrument Functions: A - L
Display
Instrument Functions: A - L
Remote Command:
:DISPlay:WINDow:TRACe:Y:DLINe <ampl>
:DISPlay:WINDow:TRACe:Y:DLINe?
:DISPlay:WINDow:TRACe:Y:DLINe:STATe OFF|ON|0|1
:DISPlay:WINDow:TRACe:Y:DLINe:STATe?
Example: :DISP:WIND:TRAC:Y:DLIN -32 dBm
:DISP:WIND:TRAC:Y:DLIN:STAT OFF
2.5.4 Active Fctn Position
Selects the screen position for the Active Function Display. Depending on the type of trace
date being viewed, you can move the Active Function Display position for less visual
interferance with your screen data.
Key Path:
Display
Readback: The selection of the position to display the active function (Top, Center,
Bottom) reads back to line 3 of this key.
State Saved: Not saved in instrument state, survives power cycle and preset.
Factory Preset: No effect, persistent variable, survives power cycle and preset.
Factory Default: Center. Pressing
System, Restore Sys Defaults will reset to factory defaults.
History: Added with firmware revision A.04.00
Remote Command:
:DISPlay:AFUNction:POSition BOTTom|CENTer|TOP
:DISPlay:AFUNction:POSition?
Example: :DISP:AFUN:POS BOT

Agilent Technologies E444 AU Series Specifications

General

Brand	Agilent Technologies
Model	E444 AU Series
Category	Measuring Instruments
Language	English