Chapter 4
Front-Panel Key and SCPI Command Reference
Measure
166
Front-Panel Key and SCPI Command
Reference
4.3.11 Audio Frequency
Allows the user to switch to the Audio Frequency measurement.
4.3.11.1 SCPI Remote Commands
:CONFigure:AUDFreq
:INITiate:AUDFreq
:FETCh:AUDFreq[n]?
:MEASure:AUDFreq[n]?
:READ:AUDFreq[n]?
Mode: MRECEIVE
Key Path:
Measure, More
Remote Command: :CONFigure:AUDFreq
Dependencies/Couplings: This key is grayed out when opt 107 is not available.
Notes: This key invokes Audio Frequency Measurement.
Example: :CONF:AUDF
Index: n
<Mnemonic>
Results Returned
0 Returns unprocessed real trace data, as a series of comma-separated trace points, in volts.
not specified or
n = 1
Returns comma-separated scalar results, in the following order:
Return the measured audio frequency (Hz)
Audio Frequency Ratio (–999 in Normal mode, Ratio: dB or % depending on Ratio Mode setting)
Ratio Reference Frequency (Hz)
To Next Page
Loading...
Need help?
General
