Chapter 4
Front-Panel Key and SCPI Command Reference
Measurement keys
259
Front-Panel Key and SCPI Command
Reference
4.4.11.2 Meas Setup
Displays the measurement setup menu for the Audio AC Level Measurement when the Audio AC Level
Measurement
key has been selected in the Measure menu.
4.4.11.2.1 Average Mode
Selects the type of termination control used for averaging. This determines the averaging action after the
specified number of frames (average count) is reached.
Exponential - Each successive data acquisition after the average count is reached, is exponentially weighted and
combined with the existing average.
Repeat - After reaching the average count, the averaging is reset and a new average is started.
4.4.11.2.2 Average Number
Sets the number that will be averaged. After the specified number (average counts) have been averaged, the
averaging mode (termination control) setting determines the averaging action.
Range: Log | Linear
Example: :DISP:AUDL:RMOD LOG
:DISP:AUDL:RMOD?
Key Path:
Meas Setup
Remote Command: [:SENSe]:AUDLevel:AVERage:TYPE REP|EXP
[:SENSe]:AUDLevel:AVERage:TYPE?
Preset: REP
State Saved: Saved in instrument state.
Range: Repeat | Exponential
Example: :AUDL:AVER:TYPE EXP
:AUDL:AVER:TYPE?
Key Path:
Meas Setup
Remote Command: [:SENSe]:AUDLevel:AVERage:COUNt <integer>
[:SENSe]:AUDLevel:AVERage:COUNt?
[:SENSe]:AUDLevel:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:AUDLevel:AVERage[:STATe]?
Preset: 25, ON
State Saved: Saved in instrument state.
To Next Page
Loading...
Need help?
General
