Agilent Technologies E5061B - Page 14

14
1. This ECal module cannot be used in the low frequency range below 300 kHz.
Calibration kits (for 75 Ω system, continued)
Model No. Description
Type-F
Mechanical calibration kits
85039B 75 Ω economy calibration kit, DC to 3 GHz
85039B-M0F Includes;
- Type-F (m) Load / Type-F (m) Open / Type-F (m) Short
- Type-F (f) Load / Type-F (f) Open / Type-F (f) Short
- Type-F (m) to type-F (m) adapter
- Type-F (f) to type-F (f) adapter
- Type-F (f) to type-N (m) adapter
- Type-F (m) to type-N (f) adapter
85039B-00F Includes;
- Type-F (f) Load
- Type-F (f) Short
- Type-F (f) Open
- Type-F (f) to type-F (f) adapter
85039B-00M Includes;
- Type-F (m) Load
- Type-F (m) Short
- Type-F (m) Open
- Type-F (m) to type-F (m) adapter
Electronic calibration kits
85099C
1
2-port (type-F), 300 kHz to 3 GHz. The sexes of the connectors depend on the option.
85099C-M0F Type-F (m) to Type-F (f) RF ECal module
85099C-00F Type-F (f) to Type-F (f) RF ECal module
85099C-00M Type-F (m) to Type-F (m) RF ECal module
85099C-00A Adds;
- Type-F (f) to Type-F (f) adapter
- Type-F (m) to Type-F (m) adapter