Need help?Do you have a question about the Agilent Technologies E5061B and is the answer not in the manual?
General| Frequency Range | 5 Hz to 3 GHz |
|---|---|
| Number of Ports | 2 |
| Impedance | 50 Ω |
| Interface | LAN, USB, GPIB |
| Measurement Parameters | S-parameters |
Safety cautions for operating the E5061B, including software handling.
Lists test equipment recommended for E5061B maintenance.
Overview of troubleshooting procedures, warnings, and precautions for service.
Step-by-step procedure to isolate and fix issues with no display on the E5061B.
Explains how to run diagnostic tests to isolate faulty board assemblies.
Procedures to troubleshoot issues related to specific E5061B functions and controls.
Details on how to order replacement parts, including part numbers and procedures.
General steps for replacing an assembly in the E5061B Network Analyzer.
Step-by-step guide for removing and replacing the outer cover of the E5061B.
Detailed procedure for removing and replacing the front panel assembly.
Procedure for removing and replacing the power supply assembly.
Steps to remove and replace the LCD assembly.
Recommended adjustments and verification tests after replacing the A1 Source Module.
Describes how to return the E5061B operating system to its factory state.
Information and requirements for updating the E5061B firmware.
Details on power source requirements and cable options for the E5061B.
Steps for correctly powering the E5061B on and off.
Explains error messages displayed on the E5061B and how to resolve them.
Describes warning messages and their meanings on the E5061B.
To Next Page
