16 Chapter 1
General Information
Required Equipment
Adapter Agilent p/n 1250-0780
Agilent p/n 1250-0077
Agilent p/n 1250-1473
Agilent p/n 1250-1474
Agilent p/n 1250-2879
5
1
1
1
2
P
P
P
P
P
Torque Wrench Agilent p/n 8710-1766 1 P,A
USB/GPIB Interface Agilent 82357A 1 P,A
Personal Computer with
GPIB board
1 P,A
Table 1-2 Alternative Test Equipment
Equipment Model Qty.
Use
*1
Frequency Counter Agilent 53131A/132A with Opt.010
and 030
*2.Opt.050 and Opt.124 can be substituted for Opt.030. In this case, a N(m)-BNC(f)
adapter is necessary.
*2
1 P,A
Feedthrough Agilent 10100C 1 P,A
Cable Agilent p/n 5062-6691 1 P,A
Short Agilent 11512A
Agilent p/n 85032-60016
2
2
P
P
*1.P: Performance Tests, A: Adjustment.
*2.Opt.050 and Opt.124 can be substituted for Opt.030. In this case,a N(m) -BNC(f)
adapter in necessary.
*1.P: Performance Tests, A: Adjustment, T: Troubleshooting
Table 1-1 Recommended Test Equipment
Equipment Recommended Model Qty.
Use
*1
To Next Page
Loading...
Need help?
General
