3
Step 3. Choose hardware option (If not required, go to step 4)
Option No. Description
E5061B-1E5
1
High stability time base
Step 4. Choose hard disk drive option
2
Option No. Description
E5061B-020 Standard hard disk drive
Step 5. Choose software option (If not required, go to step 6)
Option No. Description
E5061B-010
3
Time domain/fault location analysis
Step 6. Choose accessory option (If not required, go to step 7)
Option No. Description
E5061B-810 Add keyboard
E5061B-820 Add mouse
E5061B-1CM Rack mount Kit
E5061B-1CN Front Handle Kit
E5061B-1CP Rack mount and front handle kit
Step 7. Choose calibration option
Option No. Description
E5061B-1A7 ISO 17025 compliant calibration
E5061B-A6J ANSI Z540 compliant calibration
1. Refer to “Hardware upgrade” section for retrofit information on the above options.
2. Option 020 is the only hard disk option for the E5061B. Must choose this option when ordering the E5061B.
3. Refer to “Software upgrade” section for retrofit information on the above option.
To Next Page
Loading...
Need help?
General
