15
B attery Management Functionality
E7495A/B Manual Verification
4. Battery Discharge Statistics
Setup
• Move Battery to Battery Position #1 (closest to the Front
Display)
• Remove the Ext DC Power from the E7495A/B
Test Results
• Verify the following fields on the Battery Status Screen with a
Battery in Battery Position #1 only
Battery Status
• Battery 1 field = Present
• Battery 2 field = Missing
Run Time to Empty
• Battery 1 field = XXX Minutes (XXX should be 10 or
greater for a battery with 10% charge)
• Battery 2 field = ----
To Previous Page
Loading...
