Chapter 4 29
Regulatory Information
Statement of Compliance
Statement of Compliance
This product has been designed and tested in accordance with IEC Publication 61010, Safety Requirements
for Electronic Measuring Apparatus, and has been supplied in a safe condition. The instruction
documentation contains information and warnings which must be followed by the user to ensure safe
operation and to maintain the product in a safe condition.
Assistance
Product maintenance agreements and other customer assistance agreements are available for Agilent
Technologies products. For any assistance, contact Agilent Technologies. (Refer to “Contacting Agilent
Technologies” on page 15.)
Certification
Agilent Technologies certifies that this product met its published specifications at the time of shipment from
the factory. Agilent Technologies further certifies that its calibration measurements are traceable to the
United States National Institute of Standards and Technology, to the extent allowed by the Institute’s
calibration facility, and to the calibration facilities of other International Standards Organization members.
Compliance with German Noise Requirements
This is to declare that this instrument is in conformance with the German Regulation on Noise Declaration
for Machines (Laermangabe nach der Maschinenlaermrerordnung -3.GSGV Deutschland).
Table 4-1 German Noise Requirements
Acoustic Noise Emission/Geraeuschemission
LpA < 70 dB LpA < 70 dB
Operator position am Arbeitsplatz
Normal position normaler Betrieb
per ISO 7779 nach DIN 45635 t.19
To Next Page
Loading...
Need help?
General
